No. 1 Online Gist and Ent Portal

HOW TO USE AIRTEL BLACKBERRY PLAN ON ANDRIOD AND PC

2

For those people using glo bis on their andriod phone will not have much problem with this tutorial20160425070550 HOW TO USE  AIRTEL  BLACKBERRY  PLAN ON  ANDRIOD AND PC

.This plan is supposed to work only on Blackberry devices but you can now use it on your Android devices.

.Why Should I Use This Plan=Airtel Network is fast in
most locations=It is cheaper than glo blackberry plan=It doesn’t zap like the normal Airtel Android plan=It is easy to activate.
Requirements Blackberry 10 IMEI
Patience in tweaking the imei Activate the planTweak this Blackberry 10
IMEI 356760051192 randomly add any three digit to it.using imei analayzer or bb gen
Tweak the imei to your phone using mtk engineer or mobile uncle

.How Can I Activate the plan
Subscribe for airtel blackberry Plan 3GB for N1,000 by dialing*431#
Leave your phone apn to normal Airtel apn: internet.ng.airtel.com
to check your data balance, dial *140#

.For PC UsersJust activate the plan on your Android and use your Hotspot to connect to your PC. If you are not satisfy with the tutorial kindly ask question in the comment box

468x60_cashout HOW TO USE  AIRTEL  BLACKBERRY  PLAN ON  ANDRIOD AND PC
  1. adesokan stephen says

    Please I don’t no ow to tweak my phone and I don’t no ow to get bb10 imei pls can I get one from u pls I need very fast pls

  2. Rowland says

    how to tweak android phone.

    Note: The below method will only work out successfully with MTK devices such as Tecno, Opsson, Gionee, Infinix, Lenovo e.t.c.
    Now to get it done follow the prescriptions below:-

    1. Download MTK Engineering Mode

    2. Open the application and click on MTK settings.

    3. Navigate to the right to “CONNECTIVITY”

    4. Select CDS information, and then radio information.

    5. Now select either Phone 1 or Phone 2 depending on the sim IMEI you are willing to tweak.

    Click on the {AT+}, about 4-6 option would pop-out, just choose either of the options below:
    SIM 1:- AT+EGMR=1,7,” ”
    SIM 2:- AT+EGMR=1,10,” ”
    Put the IMEI you wish to tweak in-between the two quotation marks {“-“}
    Put a space between AT+ and EGMR.
    Make sure there is no space between the quotation marks and the IMEI number.
    “123456789012345”
    Now, tap the “send AT command” option

    After following all the above steps switch off your android phone and switch it on again. You have successfully tweak your phone IMEI. Happy Tweaking!

    Hope this information helps? If it works for you don’t forget to COMMENT here and share with friends.

Leave A Reply

Your email address will not be published.